'MasterShop Style' Skeleton DASA P220 P224 P226 P227 P228 P229 M11A1 Dual Adjustable Trigger
 
Two finishes:
Very Durable Black Nitride/QPQ
Very durable, super low friction Nickel Boron Nitride
 
Homage paid to the Mastershop DASA P226 X-Five Short triggers (pictures #2 and #3 in the above image gallery).....with a small twist:
- while the German trigger was NOT adjustable, Armory Craft trigger will be adjustable for pre-travel as well as over-travel. It will be also 'more flat across and will have front serrations' to promote a better trigger discipline with more repeatable and constant trigger finger placement.
 
* Please be sure to check out our Sig Sauer Trigger Pull Reduction Kit, which will decrease your trigger pull weight while keeping 100% ignition reliability.  On average, you can expect an instant trigger pull reduction by approximately 1.5-2 lbs in Double Action and around 1 lb in Single Action in DA/SA pistols (and around 1 lb in SAO pistols) *
 
The visible portion of the trigger is approx. 9.5mm (0.375") wide. This trigger will NOT fit any older German or West German 220/226 Sig pistols that have the older, narrow 7.5 mm wide trigger. However, we now offer those narrower, 7.5 mm slightly curved triggers as well - please click HERE.  (or flat - please click HERE)

Armory Craft is the FIRST and the ORIGINAL Manufacturer of Sig Sauer DA/SA Flat or "Slightly Curved" Adjustable Triggers for P-Series Sig Pistols that eliminate pretravel as well as overtravel.

Don't forget to check out our low mass performance skeleton hammer - HERE.
 
We are also pleased to offer the Sig Guy 2-piece punch kit that is extremely helpful for removing pins, as well as acting as a slave pin to ensure that small parts and springs are aligned during assembly and reassembly. LINK

 In addition to DA/SA pistols, this trigger will also work in DAK, DAO (Double Action Only) models. Will NOT work in SAO (Single Action Only) pistols, but we offer those as well HERE.
 
Compatible with:
P220
P224
P226
P227
P228
P229
M11A1
X5 / X-5 DA/SA Allaround
 
("FLAT" version with SAME SPECIFICATIONS as far as pretravel and overtravel elimination, is also available HERE).

This trigger WILL NOT work in any Single Action Only (SAO) models.

SAME SPECIFICATIONS as far as pretravel and overtravel elimination as our original FLAT trigger.
A direct replacement to your stock trigger for a smoother, more consistent pull.
Practically eliminates pretravel in DA (no change is SA)
DA pretravel: 0.003" (0.076mm)
Practically eliminates overtravel DA/SA Overtravel: 0.005" (0.013mm)
Designed independently from SRT - will work in pistols w/ or w/o SRT.
WITH SRT & properly adjusted: WORLD CLASS 0.065” reset (1.65mm)
Optimized *width*. Tighter & less ‘side-to-side’ wiggle vs. stock trigger.
Trigger surface with grooves.
Promotes better trigger discipline - i.e. more accuracy (especially during rapid fire, which could happen in self-defense situations and competition.
ADJUSTABLE for Overtravel adjustments /elimination in DA/SA!
Faster reset and more accuracy during rapid fire
Finished in durable Black Nitride as well as very durable and low friction Nickel Boron Nitride - this is MUCH better vs. the "nickel only' factory triggers.
 
MADE IN USA
CNC machined (NOT a MIM part)
Manufacturing facility certified to ISO 9001/AS9100 & in accordance with the requirements of AS9104A.
Our manufacturing facility is also manufacturing products for Boeing, US Coast Guard, Lockheed, Honeywell and other major US companies.

All triggers, hammers or any other gun parts are intended for installation by a gunsmith or a qualified armorer.